64 Position MULTIVAP
Samples are heated using a water bath
The 64 Position MULTIVAP contains a rectangular gas distribution system mounted on a frame and dual post assembly. The manifold delivers nitrogen gas to the needles or glass pipettes, which direct the gas onto the sample’s surface. This method results in rapid solvent evaporation and sample concentration. In order to conserve nitrogen gas, the manifold has a toggle switch for every row of 8 samples, which allows individual rows to be shut off when evaporating batches of less than 64 samples. Nitrogen gas flow is also controlled by an adjustable flow meter and a built in pressure regulator.
The 64 position MULTIVAP uses a heated water bath to reach evaporative temperatures ranging from 30°C to 100°C. Sample racks are customized within a range of 11-30 mm for the user’s sample size. Please specify sample size (outside diameter and length to nearest 0.1 mm) when placing an order. All models can withstand contact with organic solvents; however acid resistant models are also available for use with corrosive solutions.
- Adjustable flow meter, 0-50 lpm
- Dual band hoist spring assembly
- High temperature limit switch for safety
- Safety control cover plate
- Digital temperature controller
- Electronic timer
- Reset circuit
- Nitrogen filter
- Gas distribution manifold
- Adjustable pressure regulator, 0-30 psig
- High pressure tubing
- Needle guide
- Z-Purge/intrinsically safe purge case
- Acid resistant coating on instrument and needles
Made by Organomation.
If your samples require heating using a water bath, this model would be suitable. If you need more capacity, see the 100 Position MULTIVAP.
If your experiments do not require a water bath, we supply a range of other nitrogen evaporators that might be more suitable for your experiments. See our range here.