TeleFipho – Wireless Fiber Photometry

Teleopto

 

Fiber photometry is a powerful technique to detect calcium signal from specific neuron in awake animals using calcium indicator protein represented by GCaMP. In freely moving condition, the long optic fiber attached to the head of the animal can interfere with experimental setup, therefore can be a limitation factor of your project.

Contact us for more information.

Contact Us
SKU: TeleFipho-set Category: Brand:

Description

Wireless Fiber Photometry

For in vivo freely behaving animals

Teleopto’s innovative new product, TeleFipho, includes all required components for fiber photometry – optic fiber, filter cube, light source, photo detector – and also wireless transmission circuit, in the very smal 3g body. TeleFipho will not block free behavior of your animals, enabling novel experimental approach using fiber photometry.

FEATURES

  • World first commercial wireless fiber photometry
  • Small headstage / good for mice, rats, marmosets, etc.
  • Standard 2.5mm ferrule cannula
  • Rechargable by a dedicated charger
  • Adjustable excitation LED power
  • Adjustable signal offset
  • For GCaMP or GFP-like indicators

TELEFIPHO STANDARD SET

TeleFipho Standard Set consists of the following items:

  • TeleFiT 1x TeleFipho Transmitter Headstage
  • TeleFiR 1x TeleFipho Receiver
  • TeleFiCharger 1x TeleFipho Charger
  • TeleFiC_x (※) 3x TeleFipho Cannula
  • TeleFiTool 1x Insertion Tool for TeleFipho
  • TeleFiDummy 1x TeleFipho Dummy Headstage
  • 1x TeleFipho software installer

(※) Please specify cannula length. 5mm cannula will come without specifying.

e.g. Cannula length 3.5mm: TeleFic_3.5 (in mm, resolution 0.1mm)

STAND ALONE / EXTERNAL RECORDER

TeleFipho receiver can be directly connected to PC via USB for fiber photometry data recording in TeleFipho software. TeleFipho software is good enough for simple raw data / low pass filtered data recording.

Data can be directly read from Matlab / Octave, or can be exported to ASCII format.
For more complicated online analysis and / or parallel recording of other physiological data, you can access photometry data as analog signal via BNC on the front panel of TeleFipho receiver so that you can connect external data recording system (e.g. PowerLab from ADI).

See our range of Teleopto products here.

See more information at: http://www.teleopto.com/teleopto/telefipho

If you are interested in this product but unsure if it is right for your experiments, make an enquiry using the button below. Tell us about your planned experiments and our support team will be happy to assist you with your needs.

Package Contents

TeleFipho Package 1 x TeleFipho Transmitter Headstage, Emits signal to receiver, sits onto LED cannula implants when in use, varying battery life.
1 x TeleFipho Receiver, Receives IR signal from headstage, no cable means significantly less noise artifacts
1 x TeleFipho Charger, Charges headstage
3 x TeleFipho Cannulae (please specify fiber length. Default length is 5 mm), Cannula implants to record calcium signal fluorescence
1 x Insertion Tool for TeleFipho, Tool for implantation of cannula
1 x TeleFipho Dummy Headstage, Fake headstage used in between recordings when receiver isn’t needed / is being charged to train the animals to the weight of the setup.
1 x TeleFipho software installer Software

Videos